Xiranite Layout Guide In Arknights Endfield
Wuling is the second region in Arknights: Endfield, right after Valley IV. In version 1.0, arriving in Wuling means that you’ve reached the endgame. There, players must learn how to make Xiranite in Endfield, along with creating a Xiranite Component layout to make gold-quality Gears.
Gilberta Best Teams In Arknights Endfield
Gilberta is a great support in Arknights: Endfield with plenty of utilities for her team comp.
How To Make Xiranite In Arknights Endfield
To make Xiranite in Arknights: Endfield, you need to combine 2 Stabilized Carbon + 1 Water in the Forge of the Sky. Forge of the Sky is a facility special to Wuling, along with the water system, so you can’t make this building in Valley IV. Additionally, there’s a limit to how many Forge of the Sky you can make, meaning you can’t construct them endlessly to make unlimited Xiranite.
How To Use Xiranite In Arknights Endfield
Here are all the things you can make with Xiranite:
|
Xiranite Item |
Ingredients |
Facility |
|---|---|---|
|
Xiranite Component |
10 Xiranite + 10 Packed Origocrust |
Gearing Unit |
|
LC Wuling Battery |
5 Xiranite + 15 Dense Originium Powder |
Packaging Unit |
|
Liquid Xiranite |
1 Xiranite + 1 Water |
Reactor Crucible |
|
Xiranite Pylon |
5 Xiranite |
PAC or Sub-PAC (Construction) |
|
Xiranite Relay |
20 Xiranite |
PAC or Sub-PAC (Construction) |
|
Depot Bus Section |
20 Xiranite |
PAC or Sub-PAC (Construction) |
|
Depot Bus Port |
50 Xiranite |
PAC or Sub-PAC (Construction) |
Things To Do Daily In Arknights Endfield
Completing the following tasks daily will ensure players’ maximum activity in Arknights: Endfield.
Xiranite Factory Layout In Arknights Endfield
Since Xiranite only needs Stabilized Carbon and Water, you don’t need any depot belt to make it. Here’s the production flow for Xiranite in Endfield:
- 1 Sandleaf or 1 Buckflower in Refining Unit = 1 Carbon
- 1 Carbon in Shredding Unit = 2 Carbon Powder
- 2 Carbon Powder + 1 Sandleaf Powder in Grinding Unit = 1 Dense Carbon Powder
- 1 Dense Carbon Powder in Refining Unit = 1 Stabilized Carbon
If you’re using an infinite seed loop, it’s better to have two lines of production for the Sandleaf/Buckflower. Each Planting Unit will provide 1 Sandleaf/Buckflower every 4s, meaning you’ll make 1 Carbon every 4s. This will stall the creation of Carbon Powder, resulting in a non-optimal production.
So, do the following: 1 Seed-Picking Unit looping with 2 Planting Units → Direct them to 1 Refining Unit (2 Refining Units are redundant) → Connect the refinery to the Shredding Unit → Make 2 belts from the Shredding Unit to the Grinding Unit. 2 belts are required to prevent clogging.
You can make an Electric Pylon outside the factory’s border. In Wuling, Xiranite Pylon will automatically connect to the PAC, while in Valley IV, you must manually connect power lines along the outer border.
Make the same infinite loop for the Sandleaf to make Sandleaf Powder, which is required to create Dense Carbon Powder. Unlike the Carbon, you only need 1 Planting Unit for each Shredding Unit. Although you’ll be shredding 1 Sandleaf every 4s, each plant will make 3 Sandleaf Powders. You need 1 Sandleaf Powder every 2s, so 3 Powders every 4s is more than enough.
From the Grinding Unit, make 1 Refining Unit, which will turn the Dense Carbon Powder into Stabilized Carbon. Connect the building directly to the Forge of the Sky, ready for Xiranite production.
You need 2 productions of Stabilized Carbon for an optimal creation time. So, make one on each side, then connect them all in the middle.
Once you handle the Stabilized Carbon, the next step is to make a water line to the Forge of the Sky. Make a Fluid Pump, then connect the pipe to the Forge of the Sky.
How To Make Cryston In Arknights Endfield
Cryston Fiber is a material that players can use to make Cryston Components in Arknights: Endfield.
Xiranite Component Factory Layout In Arknights Endfield
To make Xiranite Component in Arknights: Endfield, you need to combine 10 Packed Origocrust + 10 Xiranite. This material is needed to craft Gears in Endfield, making it one of the most important items to produce. Here’s what you need for Packed Origocrust:
- 1 Originium Ore in Refining Unit = 1 Origocrust
- 1 Origocrust in Shredding Unit = 2 Origocrust Powder
- 2 Origocrust Powder + 1 Sandleaf Powder in Grinding Unit = 1 Dense Origocrust Powder
- 1 Dense Origocrust Powder in Refining Unit = 1 Packed Origocrust
Since you need 2 Origocrust Powders to make 1 Dense Origocrust Powder, you’ll need two lines of Refining and Shredding to properly feed the Grinding Unit. It’s best to produce the Sandleaf somewhere else, so that you can use one Shredder to provide for two Grinding Units.
You need two Grinding Units for optimal production, so this is a great setup.
From the Grinding Unit, lead the belt to a Refining Unit to make Packed Origocrust, afterwhich you can connect them directly to the Gearing Unit.
Since you need 10 Xiranite every 10s, one line of Xiranite production is not enough, so you must have two Xiranite lines feeding the Gearing Unit.
- Developer(s)
-
Hypergryph
- Publisher(s)
-
Hypergryph
- Engine
-
Unity
- Multiplayer
-
Online Multiplayer
- Number of Players
-
Single-player
